Overview

SMV panel meter and data logger represents the base solution in this high-end class of compact panel meters. All parameters and measured quantities are common with the SMP device and the most significant difference is the LED display. In a certain application its contrast and mechanical robustness is an advantage. This display option provides values of actually measured data with recorded average, maximum and minimum values, electricity meter readings and actual time. Basic setup and configuration is also possible through the set of parameters. All the other information, archived data and all advanced configuration options can be accessed in the supplied management software over communication interfaces.

SMP devices are all-purpose compact panel meters with uncompromisable list of measured quantities. Device has back-lit high resolution LCD graphic display to immediately check all actual and average values, week and day trends (graphs), phasors, harmonic and inter-harmonic diagrams, actual wave-shapes, actual, last month and total electricity meter readings, archive statuses and many other relevant information. The device provides menu for a user-friendly navigation with easy access to most of the configuration options and parameters. To protect data and infrastructure against unauthorized manipulation a two-level administrator lock mechanism is also implemented.Optionally the SMP devices can also record voltage events (dips, swells) as defined in DIN EN 50160.

SMPQ is the most advanced device in this category. It continuously evaluates power quality according to DIN EN 50160. Additionally included are short and long-term flicker severity indexes according to IEC 61000-4-15 and harmonic emissions measured up to 50th harmonic and inter-harmonic subgroups as defined in IEC 61000-4-7. The device has improved precision of power and energy evaluation and by default it is equipped with an evaluation of voltage events.

Downloads

ENVIS Application enables basic configuration, data acquisition and analysis on a connected PC. In its basic version which includes all the standard functions it is available for download free of charge (for all supported instruments).

Documents: 

SMV SMP SMPQ - Communication Protocol [188.4 Kb]
SMV SMP SMPQ - Manual [3.5 Mb]
SMV SMP SMPQ - Decl. of Conformity [185.9 Kb]
SMV SMP SMPQ - Shortform [1.5 Mb]
SMV SMP nad SMPQ - Leaflet [1.5 Mb]

Features

• evaluation of electrical parameters in energy distribution systems or electrical installations
• in compliance with IEC EN 61000-4-30 class S
• fast and continuous measurement cycle (10 periods/~200 ms, gap-less)
• selection of aggregation intervals from 200 ms second up to 2 hours
• active and reactive electricity meter according to EN 62053-21, EN 62053-23
• data flagging concept that eliminates double evaluation of critical events
• digital flicker meter (IEC 61000-4-15)
• up to 40th harmonic and inter-harmonic components (IEC 61000-4-7)
  

• high capacity for recording of aggregated measurement values- 512 Mb memory
• run-time device operation log
• automated electricity meter readings at preselected time intervals
• day profiles (detailed day long record) at preselected date and at the day with maximal demand
• event log to record dips, swells and short interruptions according to EN 61000-2-8
• separate archives for power quality evaluations according to EN 50160 in SMPQ
  

• user friendly installation and configuration
• displayed actual measured values of all available quantities
• floating average values
• day and week charts for voltage, currents, powers etc.
• phasor, harmonic and inter-harmonic diagrams
• status bar with time and output status, operational information and many more 
• configurable inputs and outputs, alarm LEDs

Conectivity

• open and documented protocol with free data acquisition software
• support for MODBUS RTU and MODBUS TCP for simple integration with 3rd party SCADA software
• embedded web server with Ethernet option for comfortable remote access to the device
  
• built-in USB 2.0 communication port for fast data acquisition, configuration and firmware upgrades
• optional remote communication over serial line (RS 232/485) and Ethernet.
• optional micro secure digital (SD) card slot for local data acquisition

Options

Accessories

Split Core Current transformers x/5A

this type of CT is supported with the regular type of instrument. It is suitable for simple online installation of the measuring instrument (without interruption of operation of the measured system).

JC24S 36S - Split Core CT [693.3 Kb]
JC32 - Split Core CT [611.2 Kb]
JCB - Split Core CT [505 Kb]

CT Assortment for „-X“ option instruments

This type of  current transformer }CT) is shipped in sets of 3 or 4 pieces. The package also includes connector and 3 meters long cable.

Set Marking Example: SMPX-I4-JC10F (= 4 pcs of JC10F with connector & cable)

Flexible Current Probe (Flex, Rogovski) B3000 and B1000 are supported with option F a nd CA of the analyser

Flexible Current Sensors (Rogovski) The A3000/1000-JRF and the B3000/1000-JRF flexible current sensors can be used with the appropriate instruments to measure currents in low voltage grids. Sensors are equipped with signal amplifiers and a four-position range switch built into the sensor cable. Maximum current range is 3000 or 1000 Amps AC. The sensor/amplifier is powered from the connected instrument. Sensors are terminated with plastic four pole “Hypertac“ connector as a standard product (other connectors are available upon request). The type "A" sensors serve for older instrument models (SIMON 341 FLEX a SIMON 341 PLUS). The type "B" sensors have lower supply and output voltages and are designed for new SIMON PQ and BRAVO portable analyzers and -F and -CA option SMV/SMP/SMPQ panel meters. A3000 A1000 - Manual [456.5 Kb]